N1MM+ Voice Hot Keys (F-Keys) - Printable Version +- W1NRG Forum (https://www.w1nrg.com/forum) +-- Forum: Contesting DXing And Special Events (https://www.w1nrg.com/forum/forumdisplay.php?fid=35) +--- Forum: Contesting (https://www.w1nrg.com/forum/forumdisplay.php?fid=9) +---- Forum: N1MM+ Contest Program - Hints and Kinks (https://www.w1nrg.com/forum/forumdisplay.php?fid=39) +---- Thread: N1MM+ Voice Hot Keys (F-Keys) (/showthread.php?tid=787) |
N1MM+ Voice Hot Keys (F-Keys) - K1RCT - 05-09-2016 Any interest in learning how to make the F-Keys in N1MM+ work for SSB? Since I've had to re-establish N1MM+ Databases and other related files, I have some increased familiarity with the process (since I've had to do it three times now ) and could make a single evening Power Point Presentation (maybe with handouts if there's enough time) for an Activity Meeting. Take the poll! RE: N1MM+ Voice Hot Keys (F-Keys) - K1RCT - 07-17-2016 Hints & Kinks A) N1MM+: 'Operator Login'. When operating our Club Station, remember to log your callsign prior to making contacts. Press [CTRL] + [O], a popup window appears. Type your own callsign, press [ENTER]. All of your contacts will be recorded as W1NRG but if the QSL Manager or Contest Organizer has a question about a specific contact, we can ask the Operator about it. Also N1MM+ keeps tabs on rate by Operator if anyone were interested. B) N1MM+: 'Enter Sends Message Mode'. You must first enable "ESM" Mode. In Config., under the F Key Tab, enable Next is F4 Key. Then in Config., check the Enter Sends Message Mode. Of course your Audio Files must be in-place and enabled. Right mouse-button click any F-Key in N1MM. You will be taken to the F-Key config applet. Here you can see where the F-Key files are defined by name. Once your .wav files are made, it's an easy matter to redefine these keys. For another Hints & Kinks Article though! While Running and upon hearing a Caller; type the Callers callsign, press enter once to answer his call, enter again to exchange, enter again keys TU, logs the contact and re-enters CQ mode with the callsign. Works similarly for S&P. We'd have to set up your favorite or usual F-Keys (voice files for SSB, text files for CW/Digimodes). This feature dovetails with 'Operator Login' above. Once the voice files or text files are complete, we drop those in a folder named with your callsign. Once you log in with your callsign, the files in your named folder will be in-use until you log off. I first tried this during the 2016 CQ WW RTTY test. For a 4 numeral callsign, that's 7 keystrokes!! |