Resonant ground?

[KC1BAQ]

Steve,

Is that cable shielded? I think some of the cheaper ones are not so you might want to check on that.

73,
Joe
KC1BAQ

Odd little thing popped up. Have a Kenwood TS-2000 and running HRD using a 'good' FTDI based USB to RS-232 adapter. All works great, except on 10m. Key up and the USB adapter goes unrecognized by the PC. All other bands work fine. Of course when the USB goes unrecognized then HRD stops logging and working with the radio. My guess is a ground issue.

I'm on the second floor of my house. Ran a 14 AWG run of wire for my ground which is about 40' long. Something to research this weekend.