ARRL 10 METER CONTEST

[K1RCT]

Meeting Notes:

10M Contest Informal Meeting @ Dad's

Attendance Log


1 Dave Arruzza W1CTN
2 John Blevins K1VDF
3 John Bartscherer N1GNV
4 Rob Cichon KC1ACN
5 Steve Allen KC1AXJ
6 Joe Hamm KC1BAQ
7 Jon Winslow KB1HCC
Decided to equip the Antenna for High Power using the Club
Amplifier. Use of Amp dependant on Operator & Conditions.
Making a directional antenna at Quicksilver Radio on 12/6 10AM
Haggie making a Verticle Antenna for use.
Dave W1CTN digging out an antenna in backyard, directional.
Installing three (3) antennas at W1NRG for the 10M Contest
Working only daytime. May reevaluate if Flux indicates openings
Interest in making Contest Meetings monthly at Dad's
Haggie, Rob, Dave A and John using their Tripod setups for Antennae
Need for Setup Crew before event, TBD as we draw closer.
WiFi Hotspot must be renewed before 10M Contest: Rob
K1MVM wants to Operate AM or Early Afternoon Sunday
N1GNV wants to Operate Saturday Sunday
KC1BAQ committed to Operating
KC1AXJ committed to Operating
John Yusza K1LYP indicated interest.
KC1ACN wants to Operate Saturday and Sunday

I will keep this Forum Post as a Continuing Post for All to keep track of the 10M Contest as we progress. In addition to the above amended notes, please read the following:

-Steve Waldmann WV2KLM offered a 10M Verticle for the Contest.
-Dave W1CTN offered a 10M Hygain 3el Beam for the Contest as well as plans for fabricating 10M 2el Beams for the Fabrication Team to consider.
-Al suggested there may be 'RF In The Shack' issues when using the Amplifier as well as being willing to set up N1MM Classic for the 10M Contest.
-I have several ferrite toroids that I will bring to The Club that we can utilize during the Contest if needed.
- I will fabricate a 10-3 Extension Cord with 5-20P/R Power Connectors for use with the Amplifier during the Contest which I will donate to The Club afterwards.
-Bill W1KKF offered to Operate CW if someone is willing to Log for him during the Contest.
-Haggie KB1HCC indicated "All In" which to me, means he not only is willing to help with the 10M Verticle construction & Station Setup but is willing to Operate as well.

We still need Operators (December 13 - 14 2014 at The W1NRG Clubhouse),
Beam Construction Crew Members on 12/6 at Quicksilver Radio in Meriden (Address Here):
(Quicksilver Radio Products, 387 South Colony St., Meriden, CT 06451)
and Setup/ Takedown Crew Members before and after The Contest to set up the Station.

Please email me via The Reflector or personally at KC1ACN@arrl.net or reply here if you want to or are willing to help!

-- Rob